ATmega328 Add-On for Letry

$8.00

20 in stock (can be backordered)

SKU: ATmega328 Category:
Order 10 or more for 10% qty discount

Description

Includes:

  • ATmega328 with the open source Arduino Uno bootloader
  • 28Pin Machined IC Socket (round pins) – helps protect pins
  • 16mhz Crystal

When programming please select the “Arduino Uno” under Tools>Board in the Arduino™ IDE.

Please be careful to always insert and remove from the breadboard straight up and down. The easiest way to remove from a breadboard is to use a small flat blade screw driver and alternate gently prying up the left and right side so as not to bend the pins. The pins will break/bend if you take it out at an angle. If you do happen to break off one of the pins, all is not lost! This kit comes with a socket attached to the main IC chip, you can remove the socket by carefully using a flat blade screw driver to alternately pry the left and right of the IC chip out of the socket. The IC chip can be used without a socket, it is just slightly more delicate.

Instructions for use with the Letry robot kits

Additional information

Weight .1 lbs
Dimensions 2 × 1 × 1 in

Reviews

There are no reviews yet.

Be the first to review “ATmega328 Add-On for Letry”

Your email address will not be published. Required fields are marked *