BuildTak Flexplate System for QIDI TECH I 3D Printer + Extra Plate + Extra PEI Sheet



The entire setup for the QIDI TECH 1 printer with 6.25″ x 9.25″ is included.

PEI print surface will last longer than the standard buildtak print surface – but you will need to use 50C bed temperature for proper PLA adhesion. Print PETG at 80C bed temperature on PEI, much less on the buildtak sheet.


  • flexplate magnetic bed
  • 2x spring steel plate
  • 1x buildtak sheet
  • 1x PEI sheet